Analysis of control systems in multivariable teaching processes
Abstract
The present work shows the design and construction of a multivariable module for the analysis of control systems focused on the development of laboratory practices for temperature and luminosity processes using the Lambda method for tuning. Through bibliographic and experimental research, the schematic design of the conditioning circuits of the control systems for the fan and the incandescent bulb is determined, as well as the acquisition of data from the temperature and luminosity sensors used. The designs were made in finite element software to then materialize them on a board with the module as the final product for subsequent testing. Data communication between the software and the module was carried out through a data acquisition card depending on the programming logic and system requirements. Finally, the control of the processes can be determined having at the end the ON-OFF and PID type, according to these results it is identified that the system is suitable to be used in practices in order to experiment different aspects related to automatic control and their relationship in multivariable processes.
Downloads
References
D. Alciatore, «Introducción a la mecatrónica y los sistemas de medición,» McGrawHill, México, 2008.
R. Dorf, «Sistemas de Control Moderno,» Pearson Educación, Madrid, 2005.
B. Egidio, «Instrumentación industrial,» Instituo Brasileño de Petróleo y Gas, Río de Janerio, 2006.
P. Pere, «Diseño y automatización industrial.,» Universidad Politécnica de Cataluña, Cataluña, 2009.
D. J. M. R. S. G, Teoria de control. Diseño electrónico, Barcelona: Edicions UPC, 1998.
Y. Yang, «Diseño y Realización de Controlador de Temperatura del Agua PID Fuzzy Selftuning basado en PLC,» Conferencia Internacional de Sistemas Inteligentes, 2012.
E. Bega, «Instrumentación Industrial,» Finkel, Rio de Janeiro, 2006.
D. J. M. R. Spartacus G, Teoría de control. Diseño electrónico, Barcelona: Edicions UPC, 1998.
Copyright (c) 2022 Ciencias de la Ingeniería y Aplicadas
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
The authors who publish in this journal agree to the following terms:
- Creative Commons Attribution-NonCommercial-NoDerivatives License allows others to share the work with acknowledgment of authorship of the work and initial publication in this journal.
- Authors may separately establish additional agreements for the non-exclusive distribution of the version of the work published in the journal (for example, placing it in an institutional repository or publishing it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to disseminate their work electronically (for example, in institutional repositories or on their own website) before and during the submission process, as it can lead to productive exchanges, as well as further citation. earliest and largest of published works (See The Effect of Open Access) (in English).
